Pour vous donner une idée d'un produit avant
coupe :
(pour des raisons évidentes je ne copie pas le lien)
"MW Test: 372.27 g/mol (Very close to official posted molecular weight of diacetylmorphine 369.41g/mol) Slight difference is likely due to impurities as nothing is completely pure as it's official molecular weight. I would avoid posting this test results as it makes idiots who don't understand chemistry think its cut. I just ran it to be thorough for your knowledge.
SOLUBILITY : 75mg sample was placed in 1ml of bacteriostatic H20 and left for 10 minutes. After 10 minutes approximately 50% of sample remained. After 10 minutes heat was added to bring just under boil sample immediately dissolved 100% perfectly clear with no cloudiness or residue. Color change to solution was minimal from clear to very light tan.
MS Test:
The 40mg sample was found to contain 96.2% opioid alkaloids in the following ratios:
93.2% Diacetylmorphine (Heroin)
1.2%
Morphine0.6%
Codeine0.6% 6MAM
0.58% acetylcodeine
Trace non-opioid peaks (3.8%) included acetic anhydride, sodium carbonate, and calcium oxide.
Just to let you know what you put into your veins or nose."